Embedded Passive (Resistor, Capacitor and Inductor) and Active (IC …) PCB

As a type of PCB assembly technology contributing to multiple functions and high performance of wearable electronic devices, embedded technology plays an active role in shrinking interconnect path between components and reducing transmission loss. It is one of solutions to lead PCBs towards miniaturization, high integrity and high performance. It buries contributes to obvious reduction of connection points, external pads, number of thru holes and lead length so that printed circuit board integrity can be improved and parasitic inductance of printed board can be decreased. Up to now, commercial, aeronautic, military and medical products have been the leading candidates for applying embedded component PC board.

Types of Embedded Components

Embedded components in PCB boards fall into two main categories, passive and active, but are largely used in different ways and for different purposes. Embedded passives fill the large majority of components. Consequently, embedded capacitor and resistor has been studied comprehensively.

The term “embedded passive” does not generally refer to a discrete resistor, capacitor or inductor simply placed in a cavity within the PCB substrate. Rather, embedded passives are fabricated by choosing particular layer materials to form resistive or capacitive structures. While these types of embedded components were largely used at one point to save space, the development of smaller discrete passives (such ass 01005 packages) have rendered them non-essential for that purpose in many embedded PCB designs.

Embedded passives still offer several benefits, including reduction of parasitic effects and size, and have become a common fabrication alternative to discrete surface-mount passives. This can be especially beneficial for applications such as series termination resistors, where hundreds of transmission lines enter dense ball-grid array (BGA) microprocessor and memory devices. Embedded PCB manufacturing steps to place an IC within the PCB substrate can vary, but space must be created for the component body, in the form of a cavity. There are a few notable approaches to chip embedding technology:

l  Integrated module board (IMB): Components are aligned and placed inside a cavity that is routed to the core laminate by controlled-depth routing. The cavity is filled with molding polymer to ensure chemical, mechanical, and electrical compatibility with the substrate. Isotropic solder is impregnated with the polymer to form reliable solder joints when the embedded part is laminated into the stack.

l  Embedded wafer-level package (EWLP): All technology steps are performed at the wafer level. Fan-in is always required, meaning the area available for I/O is limit to the chip footprint size.

l  Embedded chip buildup (ECBU): Chips are mounted to polyimide film, and interconnect structures are built up from there.

l  Chip in polymer (CIP): Thin chips are embedded into buildup dielectric layers of PCBs, rather than integration them into the core layers. Standard laminated substrate materials then can be used.

Considerations for Components Design

It’s important to consider the physical orientation and layout of components when designing for embedded purposes. Additionally, properly choosing compatible component and substrate materials helps reduce the chance of failure during manufacturing.

For embedded passives, choosing particular materials ultimately determines the electrical properties of those components. Embedded resistors are simply sheet of resistive film, dimensioned to achieve a certain resistance value. Resistance can be calculated using:

Where ρ is the resistivity of the material, L is the length, and A is the area. (W and t are the width and thickness, respectively.) Resistivity varies for each resistive film material and is directly proportional to the final resistance value, meaning the material choice is a critical part of the design and manufacturing process. 

Embedded capacitors are fabricated by arranging and dimensioning copper cladding as plates, with the dielectric material in between chosen accordingly. Capacitance can then be calculated using:

 Where εr is the dielectric constant of the material, ε0 is the permittivity of free space, A is the plate area, and d is the distance between the plates.

The dielectric constant varies based on the chosen material and is directly proportional to the final capacitance value. From this equation it is clear that capacitance is increased by decreasing plane-to-plane distance in the PCB board layers and by maximizing the plane areas. Special materials are available that allow dielectric strength to be maintained while producing a dimensionally stable, yet very thin, plane-to-plane dielectric layer to increase plane capacitance for power supply decoupling.

For embedded ICs and other active components, materials are chosen primarily to account for long-term reliability of components in cavities and for substrate durability. Coefficient of thermal expansion (CTE) can describe how a material will change and react to high-temperature events or processes, such as reflow soldering performed for surface-mount components. If CTE (specially z-axis expansion) is mismatched between the substrate material and polymer used to fill cavities, the PCB board structure and integrity can be compromised.

Two basic process flows are sued when aligning and placing embedded passive and active components in cavities: face-up and face-down. By embedding components face-down, it is only required that cavities be created at a depth equal to the package height, meaning several chips different thicknesses can be embedded on the same layer. Face-down manufacturing allows for good dielectric material thickness control, as well as good component placement accuracy during the component assembly process

Embedded PCB Manufacturing Process

Embedded components PCB manufacturing steps will vary based on the process decided by each individual producer, as well as the available equipment for manufacturing. Generally, the manufacturing process for embedding component can be split into two categories: components aligned and placed within cavities, and component molded into the substrate, with additional structures built up from there.

PCB cavities can be formed using different configurations and manufacturing techniques. As the technology for embedding active component has advanced, newer and more efficient methods for developing cavities have been developed, with improved reliability and higher production yield added benefits.

Laser drilling cavities offers the highest precision and positional accuracy of any method. The laser beam is precisely controlled to achieve uniform depth control and wear, as dielectric material is removed. Since the laser typically uses a large wavelength, it cannot penetrate copper layers, establishing a well-defined “stop layer” for the process. After the cavity has been formed, an anisotropic conductive adhesive substance is added, and a component is placed in the void. Heat is applied to the system at a specific pressure to melt the solder particles dispersed in the adhesive material and form reliable solder bonds.

Milling offer a more conventional and cost-effective approach for creating cavities. Milling tools have been reduced in size enough to keep up with most modern fabrication needs, but there is a practical limit to the processing technology. Nevertheless, milling and routing technology is better established than laser drilling, so it is more readily available for creating cavities.

Thin wafer packages can be integrated directly into buildup dielectric layers, rather than utilizing cavities drilled or toured into core material. Standard laminated substrate materials such as multilayer FR4 then can be used, reducing cost and risk to production yield. First, a thin chip is die-bonded to a substrate. Next, either a liquid epoxy or a limited resin-coated copper (RCC) film is applied as dielectric. By optimizing the heated press lamination process, the chip can be embedded without voids.

Recommended Documentation

Properly documenting a design with embedded components can go a long way toward reducing manufacturing time and cost. The embedded components process combines PCB manufacturing, component packaging, and component assembly into a single manufacturing process flow:

l  Layer stack diagram: A cursory diagram shows the location and orientation of cavities for embedded components

l  NC drill file: A separate file should be generated to account for cavities. This information is much more detaled and accurate than a layer stack diagram, and it will be used during bare-board fabrication for routing or punching.

l  Fabrication notes: Any useful information for the fabrication process should be noted. This may include specific substrate material choices or polymer and epoxy materials used to fill cavities.

l  Pick-and-place file: A separate file should be generated for components to be embedded. It should include information about component location, rotation and layer.

l  Assembly notes: Additional assembly information not included in the pick-and-place file should be noted. This may include whether the component is flipped on the layer or any special assembly instructions.

Embedded Component PCB Prototypes

1.       With increasingly more efficient manufacturing processes being developed, devices utilizing embedding components have become more prevalent. Wireless modules often are employed to reduce a PCB board profile.

2.       Embedded components have become especially prevalent in the mobile industry, where low-profile devices are critical. Some mobiles feature a Wifi module PCB board with components embedded in a cavity.

3.       Bare-die or chip with modified packages are often used to reduce a PCB board’s profile when embedding. Stacked die can be used within a chip as well.

4.       Chip-in-polymer technology enables thin packages to be embedded directly into the laminate framework of a PCB. Multiple dies can be stacked, without the need for board cavities, to further increase component density.

This eliminates the need to put it into a cavity, but stacked-died chips are more expensive. Although the technology for embedding passive and active components within the PCB board substrate has been available for some time, it has only recently become commercially viable to perform such steps during manufacturing. Market demand for high-density, low-profile electronic devices has pushed past the potential drawbacks, such as reliability concerns and risks to cost and production yield.

Embedded Passive Standards

l  IPC-4821 Specification for Embedded Passive Device Capacitor Materials

l  IPC-4811 Specification for Embedded Passive Device Resistor Materials

l  IPC-2316 Design Guides for Embedded Passive Device Printed Boards

l  IPC-6017 Qualifications and Performance Specifications for Printed Boards Containing Embedded Passives

Embedded component PCB can provide a range of advantages for applications requiring high-speed printed circuit board. At MADPCB, we provide a wide range of embedded capacitors, resistors and inductors PCBs for a variety of industries. As electronics become smaller and more advanced, our customers look for cost-effective components and faster time-to-market solutions. MADPCB can be counted on to proceed your embedded PCB fabrication. Any questions or demand, feel free to contact us.